New Site Format
     As you know
  StampedeProject has
  become way more than
  just Stampede, Traxxas,
  to now include other
  RC brands, accessories,
  and cars. I still don't sell
  anything, I just
  enthusiastically promote
  those RC products I think
  are great.
     Take a look through
  the above links.
  I simply had too much
  information for my
  old site format.
  More fun projects
  coming...
  - Tony

  StampedeProject.com

  Please Private Message
  me Here on the
  Traxxas Forum    

  Copyright 2007
  all rights reserved 

Hot Bodies Brushless Cyclone
by Tony Arnold - StampedeProject.com

Hot Bodies Cyclone – From Stripped to Ripped
I happened across a used carbon fiber Andrew Hillman World Champion edition Cyclone roller in almost perfect condition. I say almost because 90% of the screw heads were stripped and it needed bearing and belt replacements.

-----Call Out------
Cyclone Upgrades
#1 Screw extractor bit
Cyclone chassis screws
Mamba Max 7700 System
MaxAmps 14.8V 4S 3000Mh Lipo Pack
Geared 50/88
Jaco High Speed Rated Foams
ProtoForm DNA Body
Belt replacement
Zero Degree blocks
Boca Secret Weapon Plus Plus Ceramic Bearings
Spectrum RX/TX
Not Pictured
Castle BEC ( Battery Eliminator Circuit)
High Voltage Industrial Cooling Fans
-------------------------

Since this outstanding RC has sat patently waiting for something special to happen, I decided to let it see some speeds that many RC’s only dream about. Initial testing of the Mamba Max 7700 A123 3S powered Cyclone went very bad when an old front belted tire blew at 57MPH at mid-throttle and broke the rear blocks and a couple pins.  Despite the damage, I still wanted more speed.  Sure 7700Kv motor isn’t recommended with the 4S packs like the slim MaxAmps pack I used, but there have been more than a few nuts like myself to go ahead and do it anyway. Although I added a new roomier Cyclone Brushless Motor Mount, I made some extra tweaks on the mount with my Proxxon mini-mill to allow for the extreme 50T/88T gearing.

After breakage and belt replacements, I swapped the stock bearings for some Boca Plus Plus Ceramic models for maximum spin.  A Spectrum RX/TX set was added to assure high-speed control. I topped it off with a DNA ProtoForm body with wheel wells intact for better aerodynamics and pre balanced high shore Jaco foams to handle the speed. How fast? Let’s just say with the later added Castle BEC and fans on the ESC and motor it easily and consistently rips way past 70MPH on high speed runs without thermaling. The Cyclone is now a bullet that will outrun all but the most specialized RCs.  Drop the gearing and voltage to something normal and that Mamba Max system will easily spin all day at the track.